Spooky Readers Club- DTF Print

ADULT SIZES: 11 INCHES AT LONGEST SIDE

OVERSIZED PRINT: 14 INCHES AT LONGEST SIDE

YOUTH SIZES: 8 INCHES AT LONGEST SIDE

THIS IS A DTF (DIRECT TO FILM) READY TO PRESS TRANSFER. THIS IS NOT A PNG FILE. THIS IS NOT FOR A COMPLETED TEE!


A heat press is needed for DTF transfers.

ALL TRANSFERS ARE SHIPPED IN A RIGID MAILER FOR PROTECTION!

A STANDARD heat press is RECOMMENDED for best quality!

Standard DTF Transfer press instructions:
Step 1: Pre-Pressing the T-Shirt or other Fabric
* Pre-Press to smooth out any wrinkles
* A Pre-Press will also remove moisture from the material
* Pre-Press at 300-325°F for 3–5 Seconds

Step 2: Applying the DTF Transfer to standard tees
* Direct film transfer does not need to be used immediately
* Place the image right-side up (white wide will be touching the fabric).
* Heat press at 300-325°F for 10-12 seconds with Medium Pressure (60psi)
* 285°F for 100% Polyester

Step 3: Peel DTF Transfer ONCE COOLED. We DO NOT use hot peel film!

* Some heat presses might not be calibrated correctly and can cause issues if not at the right temperature (higher than 320°F). The coating could bond to the ink instead of the fabric.

* If you are having issues with peeling the transfer, lower the temp to 260-285°F

* If you are having trouble getting a proper peel, you can try to let it completely cool, then try to peel.

Step 4: Direct to Film Finishing Press
* Should be done on every garment application
* Cover & Press again for 4-5 Seconds using a teflon sheet, cotton tee or other preferred method.
* Enhances the longevity and wash fastness of the print

We are NOT responsible for incorrect pressing or issues while pressing.